Topo Automatic Shifter Overlay (Printed Series) - 2021+ Bronco Automatic

• Topographic map designs to choose from, tons of colors
  
• Easy to apply
• Sold as a pair (1 extra)
• Fits ALL Automatic Transmission 2021+ Broncos
• Topo GOAT mode dial overlay sold separately
• Optional acrylic frame
• Installation video available

2021+ Bronco Topographic Automatic Shifter Overlay (Printed Series)

This overlay looks great inside all 6th Generation Ford Broncos.  Upgrade your dull interior in a matter of minutes.  Give your bland, plastic interior some character.  At a normal viewing distance it truly looks like a custom modification.

Installation is easy.  Just follow our video.  Optional acrylic frame allows for easier mounting (we do not recommend using these frames with any aftermarket knobs).

Fits ALL Automatic Transmission 2021+ Broncos.  Sold as a pair (1 extra)

Designs

• Generic Topo - a nice topographic map style design
• Badlands - actual location in Badlands National Park based on USGS maps
• Bronco Knoll - the area including the coordinates marked on every Bronco.  34.5261 N, 116.75685 W.

INSTALLATION

Use the written instructions and video above to complete the install.   The directions for the optional acrylic frame are at the very bottom.

You will want to do this in 65+ degree weather ideally.  Stay in the shade unless it is a little on the cool side.

Recommended items:

• This Kit
• Microfiber
• Detailer spray to prep the area (without wax)
• OptionalHeat gunor hair dryer
• StickerFab application fluid or soapy water (1 drop of dish soap + 1 cup of water)

Make sure the install area and your hands are clean.  Prep with alcohol pad if needed. 

Use a wet install for this product.  Loop the vinyl over the shifter and then start at centering up the GOAT mode hole.  Gently align the rest of the vinyl.  Once your alignment is proper, slowly and gently push out the liquid.  Allow to dry and double check your install.  You can use light heat to speed up the drying process.  We do not recommend pushing the vinyl into the grooves.

Optional Acrylic Frame -

Clean the surface of the acrylic and use the same install described in the video. It will be easier to install on the frame than the actual shifter.   This is still a wet install.

Do not stretch the material as you do not want it to change shape.  The shape of the frame is a match to the overlay.  Once you get the alignment correct, allow to dry.

Once dry, press the vinyl down once more.

Then move to the vehicle, clean the install area and test fit the frame.  You will need to slip it over the shifter first and then move it towards the back.  It will be mounted around the GOAT mode dial, so you want to test and make sure the placement doesn't prevent movement.

Once you have tested the install, remove the backing and re-install.